Description
Wheel description
Standard rubber tread; hardness 80 Shore A. Centre made of two riveted galvanized pressed steel discs.
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating.
In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Swivel top plate bracket type NL
Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.
Series 53 Range
Suitable for trolleys with light-duty loads, also in the presence of obstacles and for
indoor-outdoor use.
Examples of recommended applications: tool trolleys, trolleys for industrial indoor
handling, small mobile scaffoldings, waste bin containers.Technical features
LOAD CAPACITY: 65-390 daN
WHEEL TREAD: standard rubber tread; hardness 80 Shore A.
CENTRE: made of two riveted galvanizec pressed steel discs
BRACKETS:
| NL, |
Suitable for industrial environments, also in presence of humidity. Not suitable in presence of aggressive chemical agents.
| WEAK ACIDS |  |
WEAK BASES | |
| STRONG ACIDS |  |
STRONG BASES | |
| WATER |  |
HYDROCARBONS | |
| ALCOHOL | |
SOLVENTS | |
Suitable for all types of floors, even outdoors.
They easily overcome obstacles, do not damage fragile floors, but they may mark the floor.
