Description
Wheel description
Thermoplastic polyurethane tread; hardness 55 Shore D. Polyammide 6 centre.
Plain bearing bore.
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Stainless steel axle
Axle composed of ground AISI 304 stainless steel bush, with stainless steel bolt according to UNI EN 24017 and stainless steel nut according to UNI EN 24032.
Swivel bracket with bolt hole NLX with front lock
Swivel bracket type NLX. The plate and fork are made of AISI 304 stainless steel; swivel actions: double ball greased race of AISI 304 stainless steel. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.
Series 60 Range
Uses
Suitable for trolleys and machinery with medium-duty loads, also in case of continuous
handling. Suitable for indoor and outdoor use with frequent washing and sterilisation.
Examples of recommended applications: trolleys for industrial use, tubular trolleys,
trolleys for food and chemical industry, mobile scaffoldings.
Suitable for trolleys and machinery with medium-duty loads, also in case of continuous
handling. Suitable for indoor and outdoor use with frequent washing and sterilisation.
Examples of recommended applications: trolleys for industrial use, tubular trolleys,
trolleys for food and chemical industry, mobile scaffoldings.
Technical features
LOAD CAPACITY: 120-450 daN
WHEEL TREAD: thermoplastic polyurethane tread; hardness 55 Shore D; excellent rolling resistance and elasticity, good resistance to wear and to tearing
CENTRE: polyamide 6
BRACKETS:
LOAD CAPACITY: 120-450 daN
WHEEL TREAD: thermoplastic polyurethane tread; hardness 55 Shore D; excellent rolling resistance and elasticity, good resistance to wear and to tearing
CENTRE: polyamide 6
BRACKETS:
| NL, | NL X, | M, | P, | P X, | TRAB |
Environments of use
Suitable for industrial environments, also in presence of water and saturated vapour, alcohol and glycol, mineral and organic acids.
Suitable for industrial environments, also in presence of water and saturated vapour, alcohol and glycol, mineral and organic acids.
| WEAK ACIDS |  |
WEAK BASES |  |
| STRONG ACIDS |  |
STRONG BASES | |
| WATER | |
HYDROCARBONS | |
| ALCOHOL | |
SOLVENTS | |
Floors
Suitable for tiles and cement-resin.
Not recommended unpaved floors or in the presence of processing residues.
Not suitable in the presence of obstacles, even if small.
They do not mark or damage fragile floors.
Suitable for tiles and cement-resin.
Not recommended unpaved floors or in the presence of processing residues.
Not suitable in the presence of obstacles, even if small.
They do not mark or damage fragile floors.
