Description
Wheel description
TR polyurethane tread; hardness 95 Shore A. Aluminium centre.
Ball bearing bore
The housing is obtained by moulding and contains ball bearings series Z.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Swivel bracket with bolt hole type NL
Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted.
TR polyurethane tread; hardness 95 Shore A. Aluminium centre.
Ball bearing bore
The housing is obtained by moulding and contains ball bearings series Z.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Swivel bracket with bolt hole type NL
Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted.
Uses
Suitable for applications with medium/heavy-duty loads, also with mechanical handling,
with speed up to 6 km/h. The excellent rolling resistance allows an easy handling of heavy loads even with wheels of small diameter.
Examples of recommended applications: trolleys for indoor industrial handling, AGV
trolleys, containers, electrical pallet trucks, tilt trucks.Technical features
LOAD CAPACITY: 220-850 daN
WHEEL TREAD: TR polyurethane tread; hardness 95 Shore A; excellent rolling resistance and elasticity, highly resistant to wear and to tearing
CENTRE: aluminium
BRACKETS:
Suitable for applications with medium/heavy-duty loads, also with mechanical handling,
with speed up to 6 km/h. The excellent rolling resistance allows an easy handling of heavy loads even with wheels of small diameter.
Examples of recommended applications: trolleys for indoor industrial handling, AGV
trolleys, containers, electrical pallet trucks, tilt trucks.Technical features
LOAD CAPACITY: 220-850 daN
WHEEL TREAD: TR polyurethane tread; hardness 95 Shore A; excellent rolling resistance and elasticity, highly resistant to wear and to tearing
CENTRE: aluminium
BRACKETS:
| NL, | M, | P, | EP, |
Environments of use
Designed for industrial environments, even in presence of alcohols, glycols, hydrocarbons. Not recommended in areas with organic acids and mineral acids, base solutions and saturated vapour.
Designed for industrial environments, even in presence of alcohols, glycols, hydrocarbons. Not recommended in areas with organic acids and mineral acids, base solutions and saturated vapour.
| WEAK ACIDS |  |
WEAK BASES | |
| STRONG ACIDS |  |
STRONG BASES | |
| WATER | |
HYDROCARBONS |  |
| ALCOHOL | |
SOLVENTS | |
Floors
Suitable for tiles and cement-resin.
Not recommended unpaved floors or in the presence of processing residues.
Not suitable in the presence of obstacles, even if small.
They do not mark or damage fragile floors.
Suitable for tiles and cement-resin.
Not recommended unpaved floors or in the presence of processing residues.
Not suitable in the presence of obstacles, even if small.
They do not mark or damage fragile floors.
