-
Thin sheets of metal, plastic, or other materials can be clamped together from one side, by means of blind rivets, better known as pop rivets. A tubular rivet is inserted in a hole which is drilled onto two sheets. It is then clinched by withdrawing a nail found inside the rivet. These fasteners are installed with a manual, pneumatic or electric rivet gun, to connect metal and other pieces together. These rivets are common in use both in industry, and by the DIY. Their head is made of aluminium, and they have a steel nail. Since they do not have any uncommon features, they can be found in many lengths, and diameters, and tend to be rather economical. Multitrade ensures that such rivets are regularly held in stock. -
Typical use on straight and level guardrails, to connect the upright to the top rail, or end or mid rail to the upright. Tubes cannot be joined inside a reference 101 fitting. To join tubes inside the fitting use a 104. Item BTUBE101A is often used in conjunction with fitting reference 125. -
Typical use on straight and level guardrails, to connect the upright to the top rail. Tubes can be joined inside of 104 fittings. Item BTUBE104A is often used in conjunction with fitting reference 119.
-
Typical use on straight and level guardrails, to connect the mid rails to the upright at a 90° corner. Item BTUBE116A is often used in conjunction with the 128 fitting.
-
Typical use on straight and level guardrails, to connect the mid rails to the upright. The uprights in guardrails must remain continuous with the cross rails being cut. Normally used in conjunction with the 104 fitting.
-
Typical use on straight and level guardrails, to connect the top rails to the upright. Normally used in conjunction with the 101 fitting. This fitting can also be used to create a 90° tube bend.
-
Multitrade Malta BTUBE176A - Side Outlet Tee 176-A (26.9mm) Tube Clamp or Key Clamps for 26.9mm hand rail tube. This malleable iron casting is also available in 33.7mm tube clamps, 42.4mm tube clamps, 48.3mm tube clamps, and 60.3mm tube clamps.Complies with B.S. EN1461. And are also known by the term pipe clamps. Three way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames. All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg
-
Multitrade Malta BTUBE176B - Side Outlet Tee 176-A (33.7mm) Tube Clamp or Key Clamps for 33.7mm hand rail tube. This malleable iron casting is also available in 26.9mm tube clamps, 42.4mm tube clamps, 48.3mm tube clamps, and 60.3mm tube clamps. Complies with B.S. EN1461. And are also known by the term pipe clamps. Three way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames. All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg
-
Multitrade Malta BTUBE176C - Side Outlet Tee 176C (42.4mm) Tube Clamp or Key Clamps for 42.4mm hand rail tube. This malleable iron casting is also available in 26.9mm tube clamps, 33.7mm tube clamps, 48.3mm tube clamps, and 60.3mm tube clamps. Complies with B.S. EN1461. And are also known by the term pipe clamps. Three way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames. All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg
-
Multitrade Malta BTUBE176D- Side Outlet Tee 176D (48.3mm) Tube Clamp or Key Clamps for 48.3mm hand rail tube. This malleable iron casting is also available in 26.9mm tube clamps, 33.7mm tube clamps, 42.4mm tube clamps and 60.3mm tube clamps. Complies with B.S. EN1461. And are also known by the term pipe clamps. Three way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames. All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg
-
Multitrade Malta BTUBE176E - Side Outlet Tee 176E (60.3mm) Tube Clamp or Key Clamps for 60.3mm hand rail tube. This malleable iron casting is also available in 26.9mm tube clamps, 33.7mm tube clamps, 42.4mm tube clamps and 48.3mm tube clamps. Complies with B.S. EN1461. And are also known by the term pipe clamps. Three way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames. All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg
-
Rectangular inserts come in a variety of sizes. These inserts offer an easy assembly and a high quality finish to a variety of tubular products. Multitrade normally stocks them in metric sizes. Most of them are colored black, except for a few items. LDPE Tube End Inserts provide protection from sharp tube edges and have a secure fitting. Heavy-Duty Inserts are ideal as heavy-duty feet for tubular products.
