-
- Connection Type: 3 Way Through
- Length: 67mm
- Diameter: 48.3mm
Typical use on straight and level guardrails, to connect the mid rails to the upright at a 90° corner. Item BTUBE116D is often used in conjunction with the 128 fitting. -
- Connection Type: 3 Way Through
- Length: 86mm
- Diameter: 60.3mm
Typical use on straight and level guardrails, to connect the mid rails to the upright at a 90° corner. Item BTUBE116A is often used in conjunction with the 128 fitting. -
- Connection Type: 2 Socket Cross
- Length: 40mm
- Diameter: 26.9mm
- Socket Cross Width: 80mm
Typical use on straight and level guardrails, to connect the mid rails to the upright. The uprights in guardrails must remain continuous with the cross rails being cut. Normally used in conjunction with the 104 fitting. -
- Connection Type: 2 Socket Cross
- Length: 48mm
- Diameter: 33.7mm
- Socket Cross Width: 96mm
Typical use on straight and level guardrails, to connect the mid rails to the upright. The uprights in guardrails must remain continuous with the cross rails being cut. Normally used in conjunction with the 104 fitting. -
- Connection Type: 2 Socket Cross
- Length: 60mm
- Diameter: 42.4mm
- Socket Cross Width: 122mm
Typical use on straight and level guardrails, to connect the mid rails to the upright. The uprights in guardrails must remain continuous with the cross rails being cut. Normally used in conjunction with the 104 fitting. -
- Connection Type: 2 Socket Cross
- Length: 67mm
- Diameter: 48.3mm
- Socket Cross Width: 134mm
Typical use on straight and level guardrails, to connect the mid rails to the upright. The uprights in guardrails must remain continuous with the cross rails being cut. Normally used in conjunction with the 104 fitting. -
- Connection Type: 2 Way Elbow
- Length: 40mm
- Diameter: 26.9mm
- Elbow Width: 22mm
Typical use on straight and level guardrails, to connect the top rails to the upright. Normally used in conjunction with the 101 fitting. This fitting can also be used to create a 90° tube bend. -
- Connection Type: 2 Way Elbow
- Length: 48mm
- Diameter: 33.7mm
- Elbow Width: 25mm
Typical use on straight and level guardrails, to connect the top rails to the upright. Normally used in conjunction with the 101 fitting. This fitting can also be used to create a 90° tube bend. -
- Connection Type: 2 Way Elbow
- Length: 60mm
- Diameter: 42.4mm
- Elbow Width: 33mm
Typical use on straight and level guardrails, to connect the top rails to the upright. Normally used in conjunction with the 101 fitting. This fitting can also be used to create a 90° tube bend. -
- Connection Type: 2 Way Elbow
- Length: 67mm
- Diameter: 48.3mm
- Elbow Width: 36mm
Typical use on straight and level guardrails, to connect the top rails to the upright. Normally used in conjunction with the 101 fitting. This fitting can also be used to create a 90° tube bend. -
- Connection Type: 2 Way Elbow
- Length: 86mm
- Diameter: 60.3mm
- Elbow Width: 47mm
Typical use on straight and level guardrails, to connect the top rails to the upright. Normally used in conjunction with the 101 fitting. This fitting can also be used to create a 90° tube bend. -
- Connection Type: Three way tee
- Connector Angle: 3 tubes at 90° to each other with the vertical passing through the fitting
- Diameter: 26.9mm
- Manufacturing Standard: B.S. EN1461.
- Material: Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanized finish (BS EN 1461:1999)
- Allen Key Size: 1/4
Multitrade Malta BTUBE176A - Side Outlet Tee 176-A (26.9mm) Tube Clamp or Key Clamps for 26.9mm hand rail tube. This malleable iron casting is also available in 33.7mm tube clamps, 42.4mm tube clamps, 48.3mm tube clamps, and 60.3mm tube clamps.Complies with B.S. EN1461. And are also known by the term pipe clamps. Three way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames. All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg
